 |
|
|
 |
Series of pipe fittings of steel |
 Seamless steel elbow butt welding
Equal diameter, reducing tee
Concentric, eccentric reducers
Cap (head)
Flanging short section
Bend
|
|
Forged steel threaded pipe fittings series |
Threaded elbow, tee, cross
Threaded pipe cap, pipe coupling
Threaded pipe plug (plug)
Hexagonal two-wire head
Union (threaded / socket)
Short thread
|
|
Forged steel socket welding pipe fittings series |
Socket elbow, tee, cross
Intubation cap, pipe hoop
Y-Tee (oblique three)
Reducing socket connector
|
|
Taiwan, seat tube, the branch line |
Branch table series
Block forged over (power plants)
Reducing nipple
|
|
Forging Flange |
With neck butt flange (WN)
With neck flat welding flange (SO)
Plate flat welding flange (PL)
Socket welding flange (SW)
Threaded flange (TH)
Loose flange (PJ / SE)
Flange (BL)
Large diameter flange (ANSI B16.47)
Marine flange (GB2506)
Manhole flange
Blind character
Flange Chart
|
|
Insulation joint series |
Monolithic insulating joints
Insulating joint flange
|
|
Steel adjustable tube series |
|
No SmallClass
|
|
|
 |
 |
 |
|
| Product Center |
 |
Home > Product Center
|
|
 |
| Forged steel threaded pipe fittings series >> Threaded elbow, tee, cross >> Threaded Elbow |
 |
 |
| |
|
|
Serial number: |
611055216 |
Name: |
Threaded Elbow |
Spec: |
Customization is allowed |
Memo: |
LWWT–1 |
Class: |
Forged steel threaded pipe fittings series |
| |
|
Description |
Threaded elbow, Tee, Cross Structure
 Threaded elbow, Tee, Cross Parameters
|
DN
Nominal Diameter |
The depth of commitment jack
Depth of Socket |
Bearing diameter jack
Dimension of Socket |
Wall thickness
Wall Thickness |
Center to the bottom bearing jack
Center to Bottom of Socket |
|
A |
|
Cmin |
90°Elbow, tee, cross
90°Elbow、Tee、Cross |
45°Elbow
45°Elbow |
|
DN |
NPS |
Jmin |
d1 |
3000LB
Sch80 |
6000LB
Sch160 |
9000LB
XXS |
3000LB
Sch80 |
6000LB
Sch160 |
9000LB
XXS |
3000LB
Sch80 |
6000LB
Sch160 |
9000LB
XXS |
|
6 |
1/8 |
10 |
10.7 |
3.2 |
3.5 |
- |
11 |
11 |
- |
8 |
8 |
- |
| 8 |
1/4 |
10 |
14.1 |
3.3 |
4.0 |
- |
11 |
15 |
- |
8 |
8 |
- |
| 10 |
3/8 |
10 |
17.5 |
3.5 |
4.4 |
- |
13 |
15 |
- |
8 |
12 |
- |
| 15 |
1/2 |
10 |
21.8 |
4.1 |
5.2 |
8.2 |
16 |
19 |
25 |
11 |
13 |
16 |
| 20 |
3/4 |
13 |
27.4 |
4.3 |
6.1 |
8.6 |
19 |
22 |
28 |
13 |
14 |
18 |
| 25 |
1 |
13 |
34.2 |
5.0 |
7.0 |
10.0 |
22 |
27 |
32 |
14 |
18 |
22 |
| 32 |
1.1/4 |
13 |
42.9 |
5.3 |
7.0 |
10.6 |
27 |
32 |
35 |
18 |
21 |
22 |
| 40 |
1.1/2 |
13 |
48.3 |
5.6 |
7.8 |
11.2 |
32 |
38 |
38 |
21 |
25 |
25 |
| 50 |
2 |
13 |
61.1 |
6.1 |
9.5 |
12.2 |
38 |
41 |
41 |
25 |
29 |
29 |
| 65 |
2.1/2 |
16 |
76.9(73.8) |
7.7 |
12.5 |
- |
41 |
57 |
- |
29 |
32 |
- |
|
80 |
3 |
16 |
89.8 |
8.3 |
13.8 |
- |
57 |
64 |
- |
32 |
35 |
- |
|
100 |
4 |
19 |
115.5 |
9.4 |
- |
- |
66 |
- |
- |
42 |
- |
- | |
|
Note:
1、Average of socket wall thickness around periphery shall be no less than listed values. The minimum values are permitted in localized areas.
2、Upper and lower values for each size are the respective maximum and minimum dimensions. | |
|
|
| Clicks：3145 Input date：2011-6-16 【Print】 【Close】 【Back】 |
|
|
|
|
