 |
|
|
 |
Series of pipe fittings of steel |
 Seamless steel elbow butt welding
Equal diameter, reducing tee
Concentric, eccentric reducers
Cap (head)
Flanging short section
Bend
|
|
Forged steel threaded pipe fittings series |
Threaded elbow, tee, cross
Threaded pipe cap, pipe coupling
Threaded pipe plug (plug)
Hexagonal two-wire head
Union (threaded / socket)
Short thread
|
|
Forged steel socket welding pipe fittings series |
Socket elbow, tee, cross
Intubation cap, pipe hoop
Y-Tee (oblique three)
Reducing socket connector
|
|
Taiwan, seat tube, the branch line |
Branch table series
Block forged over (power plants)
Reducing nipple
|
|
Forging Flange |
With neck butt flange (WN)
With neck flat welding flange (SO)
Plate flat welding flange (PL)
Socket welding flange (SW)
Threaded flange (TH)
Loose flange (PJ / SE)
Flange (BL)
Large diameter flange (ANSI B16.47)
Marine flange (GB2506)
Manhole flange
Blind character
Flange Chart
|
|
Insulation joint series |
Monolithic insulating joints
Insulating joint flange
|
|
Steel adjustable tube series |
|
No SmallClass
|
|
|
 |
 |
 |
|
| Product Center |
 |
Home > Product Center
|
|
 |
| Taiwan, seat tube, the branch line >> Block forged over (power plants) >> Block forged over |
 |
 |
| |
|
|
Serial number: |
6114183216 |
Name: |
Block forged over |
Spec: |
Customization is allowed |
Memo: |
DZJGZ–1 |
Class: |
Taiwan, seat tube, the branch line |
| |
|
Description |
| PN=9.81MPa、PN=13.73MPa、PN=17.36MPa、t=540℃ |
| Standard No.：D-GD87-0413-01~04 |
| Variety |
Take over the seat DN |
Dw×S |
L |
Material |
PN=9.81MPa
t=540℃
D-GD87-0413-01.02 |
10 |
16×2.5 |
100 |
12Cr1MoV |
| 20 |
28×2.5 |
120 |
| (25) |
38×3.0 |
| (32) |
42×3.0 |
| 40 |
48×3.5 |
| (45) |
60×4.5 |
140 |
| 50 |
76×6.0 |
| (65) |
89×7.0 |
160 |
PN=13.73MPa
t=540℃
D-GD87-0413-01.03 |
10 |
16×2.5 |
100 |
| 20 |
28×3.0 |
120 |
| (25) |
38×4.0 |
| (32) |
42×4.0 |
| 40 |
48×5.0 |
| (45) |
60×6.0 |
140 |
| 50 |
76×8.0 |
| (65) |
89×9.0 |
160 |
PN=17.36MPa
t=540℃
D-GD87-0413-01.04 |
10 |
16×2.5 |
100 |
| 20 |
28×3.5 |
120 |
| (25) |
38×5.0 |
| (32) |
42×5.5 |
| 40 |
48×6.0 |
| (45) |
60×7.0 |
140 |
| 50 |
76×10 |
| (65) |
89×12 |
160 | |
| PN=6.4MPa、PN<10MPa |
| Standard No.：D-GD87-0414-01.02 |
| Variety |
Take over the seat DN |
Dw×S |
L |
Material |
PN=6.4
PN<10MPa
D-GD87-0414-01.02 |
10 |
14×2 |
90 |
20 steel |
| 15 |
18×2 |
| 20 |
25×2 |
100 |
| 25 |
32×2.5 |
| 32 |
38×2.5 |
120 |
| (40) |
45×3 |
| 50 |
57×3 |
| 65 |
76×4 |
140 | |
| PN=17.15MPa t=230℃ 、PN=22.56MPa t=240℃ 、PN=28.22MPa t=270℃ |
| Standard No.：D-GD87-0415-01~04 |
| Variety |
Take over the seat DN |
Dw×S |
L |
材料 |
PN=17.15MPa
t=230℃
D-GD87-0415-01.02 |
10 |
16×2.5 |
100 |
20 Steel |
| 20 |
28×2.5 |
120 |
| (25) |
38×3.0 |
| (32) |
42×3.5 |
| 40 |
48×4.0 |
| (45) |
60×5.0 |
140 |
| 50 |
76×6.0 |
| (65) |
89×7.0 |
160 |
PN=22.56MPa
t=240℃
D-GD87-0415-01.03 |
10 |
16×2.5 |
100 |
| 20 |
28×3.0 |
120 |
| (25) |
38×4.0 |
| (32) |
42×4.0 |
| 40 |
48×5.0 |
| (45) |
60×6.0 |
140 |
| 50 |
76×8.0 |
| (65) |
89×9.0 |
160 |
PN=28.22MPa
t=270℃
D-GD87-0415-01.04 |
10 |
16×2.5 |
100 |
| 20 |
28×3.5 |
120 |
| (25) |
38×5.0 |
| (32) |
42×5.5 |
| 40 |
48×6.0 |
| (45) |
60×7.5 |
140 |
| 50 |
76×10 |
| (65) |
89×12 |
160 |
|
Note：
1、When selected, should be noted, also marked on the NPT NPT or R。
2、Shaped section of the big end and small end of the short type of work were flat side groove end, tapered pipe thread end of outer three types: large and small end of the various combinations possible with a total of Nine。
3、Reducing short section of wall is generally Sch80 (3000LB), Sch160 (6000LB), flat side groove end or pipe thread end。
4、The products comply with MSS SP95 and BS3799 requirements。 | | |
|
|
| Clicks：1609 Input date：2011-6-16 【Print】 【Close】 【Back】 |
|
|
|
|
